On this page, we have collected the information available about window tint laws within the state of Georgia. This includes the basic requirements for how dark the tint can be, and the level of reflection allowed in Georgia State. Any additional laws pertaining to window tint have also been included, including medical exemptions and penalties.
Georgia State Automotive Window Tinting Rules
How dark can window tint be in Georgia?
Tint VLT: Windshield: Non-reflective tint is allowed on the top 6 inches of the windshield.
Tint VLT: Front Side Windows: Must allow more than 32% of light in.
Tint VLT: Back Side Windows: Must allow more than 32% of light in.
Tint VLT: Rear Windows: Must allow more than 32% of light in.
How reflective can window tint be in Georgia?
Tint Reflection: Front Side Windows: Must not be more than 20% reflective.
Tint Reflection: Rear Side Windows: Must not be more than 20% reflective.
Other Georgia automotive window tinting rules & regulations:
Restricted Colors: The tint color(s) of RED AMBER are not legal.
Side Mirrors: No restrictions.
Certificate Requirements: Manufacturers are required to certify film they sell.
Sticker Requirements: A sticker identifying legal tinting is not required.
Penalties for Non-Compliance: Misdemeanor, punishable by up to 12 months imprisonment, and a fine of up to $1000.
Georgia Tint Law Reference
Tint law references:
Georgia Code section 40-8-73.1: Tinting of windows or windshields
State of Georgia – Amended Window Tint Laws
Medical exemption info:
Window tint medical exemption form for the State of Georgia (.pdf file)
Exterior Window VLT Tint
How Much Does Car Window Tinting Cost in Georgia State?
The cost of window tinting in Georgia state is variable, depending on the level of service. For a standard tint, using the classic film on a sedan car, expect to pay roughly $150 per vehicle. However, for a high-quality tint, such as a ceramic tint, costs can rise to roughly $400 per vehicle. The cheapest option is a DIY home kit, which will cost approximately $100 per car. Costs vary depending on the quality of the tint, the number of windows, the size of the vehicle, and the warranty included.
How Does Car Window Tinting Work?
When you tint a window, a lightweight film is applied to the inside pane of the glass. It is not applied to the outside of the glass. This is to protect the tinting from wear and tear, flying debris, and harsh sunlight.
The first layer will be a strong polyester laminate which should improve the performance of the windows. The polyester is a transparent film.
The next film will have tinting agents like metals and dyes, which create the shading effect. This is the layer that blocks UV rays to protect your skin from overexposure to harsh sunlight.
What Is The Best DIY 35% Tinting Product?
With so many options to choose from, it can be hard to find a tint that will actually work well on your car, especially if you buy it online. We have done a lot of research to figure out the best tinting product to apply to your vehicle yourself, and we recommend using the MKBROTHER.
Why Is This The Best?
We praise MKBROTHER so highly because of their easy-to-apply directions, their 99% UV blocking, and their scratch-resistant materials.
The MKBROTHER has a strong tint which allows in visible light but rejects the heat of the sun and the UV rays up to 99% while still sticking to the 35% restriction. This blocking doesn’t create a glare which means you won’t be distracted by the moving sunlight. The lack of glare also means that your vehicle’s interior won’t be affected by the sun rays, allowing it to stay showroom-ready for longer.
As the film is not made from metal fragments, you don’t have to worry about the tinting blocking any of your technology which normally relies on signaling.
How To Apply To Your Car
The tint is made of an adhesive film, which means all you need to do is apply the tint to the car’s window, with no special equipment on hand.
First, you need to clean the glass on your car to remove any impurities. Next, you want to cut the film to match your car’s window size. We would advise that you check their sizing section before buying, as you will want more than enough to cover your window.
After that, you can pull one corner of the tint’s protective layers to expose the adhesive. You will be given a spray solution. Spray this solution onto the adhesive side of the film and onto the inside of the window you are planning on tinting. At this point, depending on your state, you would apply the legalization sticker.
Lastly, you should place the film onto the window with the adhesive sides connecting. Then flatten out any bubbles which may have occurred in the process. If you have left any film on the edge of the window, you can cut it off with an extractor knife.
Pros & Cons Of DIY vs Professional Fitting
There is an obvious reason for doing a DIY fitting instead of hiring a professional, and that’s the price. DIY tinting is so much cheaper that it is definitely worth considering. This can help you either save money or allow you to buy better quality film without the higher charge that the professional will ask for.
However, there is a reason why professionals charge these higher prices. It’s because creating a seamless installation isn’t always easy. If you put the tinting on incorrectly, it won’t last as long, nor will it protect you as much as it should.
Medical Exemption
Georgia State Law does allow medical exemptions for special tints. A vehicle owner who requires shielding from direct rays of the sun can apply for a Limited Exemption Notice from the Department of Public Safety Permit Section. The application must be supported by a Doctor’s attestation. An exemption may be approved for the owner of a vehicle who requires shielding, or a frequent user of a vehicle who requires shielding.
The Limited Exemption Notice must be kept in the vehicle at all times. It must be displayed by the vehicle operator upon the request of a police officer.