Indiana State Window Tint Law

In this guide, we have collected the window tint laws for the State of Indiana. These include basics such as how dark a window tint can be, and how reflective the window tint can be in Indiana State. We have also gathered additional information, including medical exemptions, potential fines, and other restrictions that apply in Indiana State.

Indiana State Automotive Window Tinting Rules

How dark can window tint be in Indiana?

Tint VLT: Windshield: Non-reflective tint is allowed along the top of the windshield above the manufacturer’s AS-1 line.

Tint VLT: Front Side Windows: Must allow more than 30% of light in.

Tint VLT: Back Side Windows: Must allow more than 30% of light in.

Tint VLT: Rear Windows: Must allow more than 30% of light in.

How reflective can window tint be in Indiana?

Tint Reflection: Front Side Windows: Must not be more than 25% reflective.

Tint Reflection: Rear Side Windows: Must not be more than 25% reflective.

Other Indiana automotive window tinting rules & regulations:

Restricted Colors: All colored tints are legal in Indiana State.

Side Mirrors: No restrictions. 

Certificate Requirements: Manufacturers need to certify the film they sell in Indiana State.

Sticker Requirements: No stickers identifying legal tints are required.

Penalties for Non-Compliance: Non-compliance is a Class C infraction, punishable with a $500 fine. Repeated non-compliance is a Class A infraction, punishable with up to a $10,000 fine.

Indiana Tint Law Reference

Indiana Window Tint Legislature -9-19-9

Indiana Laws: Tinting, Glazing, or Sunscreening -9-19-9

Exterior Window VLT Tint

How Much Does Car Window Tinting Cost in Indiana State?

The standard cost of a window tint in the State of Indiana is $150, for a professional service. However, the prices vary depending on the specifications of the vehicle, and the tint used. A basic film tint for a four-door sedan will cost roughly $150. A higher-quality ceramic tint, for the same vehicle, would cost up to $400. The number of windows and the size of the vehicle will also affect the cost. A DIY tinting kit in Indiana will likely cost around $100, and cover a standard family car.

How Does Car Window Tinting Work?

When you tint a window, a lightweight film is applied to the inside pane of the glass. It is not applied to the outside of the glass. This is to protect the tinting from wear and tear, flying debris, and harsh sunlight. 

The first layer will be a strong polyester laminate which should improve the performance of the windows. The polyester is a transparent film. 

The next film will have tinting agents like metals and dyes, which create the shading effect. This is the layer that blocks UV rays to protect your skin from overexposure to harsh sunlight.

What Is The Best DIY 35% Tinting Product?

With so many options to choose from, it can be hard to find a tint that will actually work well on your car, especially if you buy it online. We have done a lot of research to figure out the best tinting product to apply to your vehicle yourself, and we recommend using the MKBROTHER.

Why Is This The Best?

We praise MKBROTHER so highly because of their easy-to-apply directions, their 99% UV blocking, and their scratch-resistant materials.

The MKBROTHER has a strong tint which allows in visible light but rejects the heat of the sun and the UV rays up to 99% while still sticking to the 35% restriction. This blocking doesn’t create a glare which means you won’t be distracted by the moving sunlight. The lack of glare also means that your vehicle’s interior won’t be affected by the sun rays, allowing it to stay showroom-ready for longer.

As the film is not made from metal fragments, you don’t have to worry about the tinting blocking any of your technology which normally relies on signaling.

How To Apply To Your Car

The tint is made of an adhesive film, which means all you need to do is apply the tint to the car’s window, with no special equipment on hand. 

First, you need to clean the glass on your car to remove any impurities. Next, you want to cut the film to match your car’s window size. We would advise that you check their sizing section before buying, as you will want more than enough to cover your window.

After that, you can pull one corner of the tint’s protective layers to expose the adhesive. You will be given a spray solution. Spray this solution onto the adhesive side of the film and onto the inside of the window you are planning on tinting.  At this point, depending on your state, you would apply the legalization sticker.

Lastly, you should place the film onto the window with the adhesive sides connecting. Then flatten out any bubbles which may have occurred in the process. If you have left any film on the edge of the window, you can cut it off with an extractor knife. 

Pros & Cons Of DIY vs Professional Fitting

There is an obvious reason for doing a DIY fitting instead of hiring a professional, and that’s the price. DIY tinting is so much cheaper that it is definitely worth considering. This can help you either save money or allow you to buy better quality film without the higher charge that the professional will ask for.

However, there is a reason why professionals charge these higher prices. It’s because creating a seamless installation isn’t always easy. If you put the tinting on incorrectly, it won’t last as long, nor will it protect you as much as it should.

Medical Exemption

Indiana state does allow medical exemptions for window tinting. These exemptions are granted to those who require extra shielding from the direct rays of the sun. Medical exemptions must be granted by a licensed optometrist or physician. The Doctor will provide the vehicle owner with a signed certificate that must be carried in the vehicle at all times. The vehicle owner must be able to produce the license upon the request of a police officer.

The medical exemption must be renewed annually. Failure to produce a valid medical exemption certificate for window tint may result in a fine.