Kansas was one of the first states to introduce laws about vehicle window tinting! They were the fifth state and introduced them back in 1987. To help you navigate these rules and regulations, we have compiled all the information below. Use this to determine if and how you should tint your windows in Kansas.
Kansas State Automotive Window Tinting Rules
How dark can window tint be in Kansas?
Tint VLT: Windshield: non-reflective tint is allowed above the manufacturer’s AS-1 line. Darkness is not specified.
Tint VLT: Front Side Windows: up to 35% tint darkness allowed.
Tint VLT: Back Side Windows: up to 35% tint darkness allowed.
Tint VLT: Rear Window: up to 35% tint darkness allowed.
How reflective can window tint be in Kansas?
Tint Reflection: Front Side Windows: No metallic or mirrored appearance allowed.
Tint Reflection: Rear Side Windows: No metallic or mirrored appearance allowed.
Other Kansas automotive window tinting rules and regulations:
Restricted Colors: red, amber, and yellow-colored tints are not allowed. All other colored tints are legal in Kansas.
Side Mirrors: Dual side mirrors are required if your back window is tinted.
Certificate Requirements: manufacturers do not need to certify their films before selling them in Kansas; you are free to use any kind.
Sticker Requirements: stickers to identify legal tinting are recommended in Kansas, but they are not a legal requirement.
Penalties for Non-Compliance: charged and fined as a misdemeanor if the vehicle does not meet the regulations.
Kansas Tint Law Reference
http://www.kslegislature.org/li_2018/b2017_18/statute/008_000_0000_chapter/008_017_0000_article/
https://www.kansashighwaypatrol.org/Archive/ViewFile/Item/97
Exterior Window VLT Tint
How Much Does Car Window Tinting Cost in Kansas State?
In Kansas, the cost of car window tinting varies across the state! It will vary depending on the dealer that does it, the type of film being used, and how many windows on the vehicle are tinted.
Providing you shop around and aren’t phased by doing some research, you can get your windows tinted for an affordable price! You can also pay more too, depending on the factors mentioned above. To get the best price, it’s worth calling some local dealerships for their prices and look at out-of-town options.
You might need to travel for the best deal, so set a budget, and remember to consider travel costs within the budget too!
How Does Car Window Tinting Work?
When you tint a window, a lightweight film is applied to the inside pane of the glass. It is not applied to the outside of the glass. This is to protect the tinting from wear and tear, flying debris, and harsh sunlight.
The first layer will be a strong polyester laminate which should improve the performance of the windows. The polyester is a transparent film.
The next film will have tinting agents like metals and dyes, which create the shading effect. This is the layer that blocks UV rays to protect your skin from overexposure to harsh sunlight.
What Is The Best DIY 35% Tinting Product?
With so many options to choose from, it can be hard to find a tint that will actually work well on your car, especially if you buy it online. We have done a lot of research to figure out the best tinting product to apply to your vehicle yourself, and we recommend using the MKBROTHER.
Why Is This The Best?
We praise MKBROTHER so highly because of their easy-to-apply directions, their 99% UV blocking, and their scratch-resistant materials.
The MKBROTHER has a strong tint which allows in visible light but rejects the heat of the sun and the UV rays up to 99% while still sticking to the 35% restriction. This blocking doesn’t create a glare which means you won’t be distracted by the moving sunlight. The lack of glare also means that your vehicle’s interior won’t be affected by the sun rays, allowing it to stay showroom-ready for longer.
As the film is not made from metal fragments, you don’t have to worry about the tinting blocking any of your technology which normally relies on signaling.
How To Apply To Your Car
The tint is made of an adhesive film, which means all you need to do is apply the tint to the car’s window, with no special equipment on hand.
First, you need to clean the glass on your car to remove any impurities. Next, you want to cut the film to match your car’s window size. We would advise that you check their sizing section before buying, as you will want more than enough to cover your window.
After that, you can pull one corner of the tint’s protective layers to expose the adhesive. You will be given a spray solution. Spray this solution onto the adhesive side of the film and onto the inside of the window you are planning on tinting. At this point, depending on your state, you would apply the legalization sticker.
Lastly, you should place the film onto the window with the adhesive sides connecting. Then flatten out any bubbles which may have occurred in the process. If you have left any film on the edge of the window, you can cut it off with an extractor knife.
Pros & Cons Of DIY vs Professional Fitting
There is an obvious reason for doing a DIY fitting instead of hiring a professional, and that’s the price. DIY tinting is so much cheaper that it is definitely worth considering. This can help you either save money or allow you to buy better quality film without the higher charge that the professional will ask for.
However, there is a reason why professionals charge these higher prices. It’s because creating a seamless installation isn’t always easy. If you put the tinting on incorrectly, it won’t last as long, nor will it protect you as much as it should.
Medical Exemption
Currently, there are no medical exemptions regarding vehicle window tints in Kansas. To avoid a fine or being pulled over by the police, your window tint will need to meet the requirements stated above. In some states, the medical exemption allows those with specific medical or health conditions to tint their windows darker than the state regulations.
To do this, you need permission and often written proof from a licensed physician. Currently, you cannot do this in Kansas. As laws and regulations are constantly reviewed and amended, it’s worth frequently checking to see if this changes. You can do this on the Kansas state website or through the DMV.