This page is dedicated to explaining Nebraska State’s window tint laws. This includes how dark the windows are allowed to be, how much reflectiveness these tints can have, and what to do if you need to have stronger tints for medical reasons. Every state has different laws in this area, so do not rely on other state’s law information.
Nebraska State Automotive Window Tinting Rules
How dark can window tint be in Nebraska? – Sedans
Tint VLT: Windshield: Non-reflective tints are allowed above the manufacturer’s AS-1 line.
Tint VLT: Front Side Windows: Tints must allow in more than 35% light.
Tint VLT: Back Side Windows: Tints must allow in more than 20% light.
Tint VLT: Rear Window: Tints must allow in more than 20% light.
How dark can window tint be in Nebraska? – SUVs and Vans
Tint VLT: Windshield: Non-reflective tints are allowed above the manufacturer’s AS-1 line.
Tint VLT: Front Side Windows: Tints must allow in more than 35% light.
Tint VLT: Back Side Windows: Allowed any level of darkness.
Tint VLT: Rear Window: Allowed any level of darkness.
How reflective can window tint be in Nebraska?
Tint Reflection: Front Side Windows: Must not have more than 35% reflectiveness.
Tint Reflection: Rear Side Windows: Must not have more than 35% reflectiveness.
Other Nebraska automotive window tinting rules & regulations:
Resisted Colors: Tint colors red, amber, and yellow are not legal.
Side Mirrors: No Requirements.
Certificate Requirements: No Requirements.
Sticker Requirements: No Requirements.
Penalties for Non-Compliance: Class V Misdemeanor.
Nebraska Tint Law Reference
Nebraska Revised Statutes section 60-6, 257: Windshields and windows; tinting; sun-screening
Exterior Window VLT Tint
How Much Does Car Window Tinting Cost in Nebraska State
Using a four door sedan as an example, and the cheapest type of tinting material (dyed film), adding tints to every door of your car will cost you between $200 – $250.
To have your tints removed, the average price is between $100 – $120.
How Does Car Window Tinting Work?
When you tint a window, a lightweight film is applied to the inside pane of the glass. It is not applied to the outside of the glass. This is to protect the tinting from wear and tear, flying debris, and harsh sunlight.
The first layer will be a strong polyester laminate which should improve the performance of the windows. The polyester is a transparent film.
The next film will have tinting agents like metals and dyes, which create the shading effect. This is the layer that blocks UV rays to protect your skin from overexposure to harsh sunlight.
What Is The Best DIY 35% Tinting Product?
With so many options to choose from, it can be hard to find a tint that will actually work well on your car, especially if you buy it online. We have done a lot of research to figure out the best tinting product to apply to your vehicle yourself, and we recommend using the MKBROTHER.
Why Is This The Best?
We praise MKBROTHER so highly because of their easy-to-apply directions, their 99% UV blocking, and their scratch-resistant materials.
The MKBROTHER has a strong tint which allows in visible light but rejects the heat of the sun and the UV rays up to 99% while still sticking to the 35% restriction. This blocking doesn’t create a glare which means you won’t be distracted by the moving sunlight. The lack of glare also means that your vehicle’s interior won’t be affected by the sun rays, allowing it to stay showroom-ready for longer.
As the film is not made from metal fragments, you don’t have to worry about the tinting blocking any of your technology which normally relies on signaling.
How To Apply To Your Car
The tint is made of an adhesive film, which means all you need to do is apply the tint to the car’s window, with no special equipment on hand.
First, you need to clean the glass on your car to remove any impurities. Next, you want to cut the film to match your car’s window size. We would advise that you check their sizing section before buying, as you will want more than enough to cover your window.
After that, you can pull one corner of the tint’s protective layers to expose the adhesive. You will be given a spray solution. Spray this solution onto the adhesive side of the film and onto the inside of the window you are planning on tinting. At this point, depending on your state, you would apply the legalization sticker.
Lastly, you should place the film onto the window with the adhesive sides connecting. Then flatten out any bubbles which may have occurred in the process. If you have left any film on the edge of the window, you can cut it off with an extractor knife.
Pros & Cons Of DIY vs Professional Fitting
There is an obvious reason for doing a DIY fitting instead of hiring a professional, and that’s the price. DIY tinting is so much cheaper that it is definitely worth considering. This can help you either save money or allow you to buy better quality film without the higher charge that the professional will ask for.
However, there is a reason why professionals charge these higher prices. It’s because creating a seamless installation isn’t always easy. If you put the tinting on incorrectly, it won’t last as long, nor will it protect you as much as it should.
Medical Exemption
Due to Nebraska’s tinting law restrictions, the level of darkness you are allowed to apply is already unusually high. Because of this, the State of Nebraska has declared that there are no medical exceptions for tintings law restrictions.
If you do not agree with this rejection and need to have a darker tint, you are allowed to petition to the state in an attempt to appeal for darker windows. If your appeal is successful, the law will be changed.
To attempt an appeal, you need to contact the Nebraska State Representative directly. To do this, you will need to travel to the Nebraska Legislature Webpage.