Oklahoma introduced tinting laws in 2005 and was the 45th state to do so. Oklahoma has specific regulations that must be followed when tinting your vehicle’s windows. To help you understand the regulations, we have compiled all the information below. Use this to ensure that your tint meets regulations and is safe for the roads.
Oklahoma State Automotive Window Tinting Rules
How dark can window tint be in Oklahoma?
Tint VLT: Windshield: a non-reflective tint is allowed either above the manufacturer’s AS-1 line or the top five inches, whichever comes first.
Tint VLT: Front Side Windows: up to 25% tint darkness allowed.
Tint VLT: Back Side Windows: up to 25% tint darkness allowed.
Tint VLT: Rear Window: up to 25% tint darkness allowed.
How reflective can window tint be in Oklahoma?
Tint Reflection: Front Side Windows: these must be no more than 25% reflective
Tint Reflection: Rear Side Windows: these must be no more than 25% reflective.
Other Oklahoma Automotive Window Tinting Rules & Regulations:
Resisted Colors: all colored tint is illegal in Oklahoma.
Side Mirrors: Dual side mirrors are required if your back window is tinted.
Certificate Requirements: film manufacturers must supply certified film within the state. You must check your dealer is using certified film before having the work undertaken.
Sticker Requirements: no legal sticker is required to identify legal tinting.
Penalties for Non-Compliance: you can be charged with a misdemeanor for failing to comply under Section 17-101 of Oklahoma’s statutes.
Oklahoma Tint Law Reference
Exterior Window VLT Tint
How Much Does Car Window Tinting Cost in Oklahoma State?
The cost of car window tinting in Oklahoma varies across the state. We see affordable tinting, especially in the cities, but the cost varies dramatically across the state. We recommend shopping around and doing your research beforehand to ensure that you get the best price possible.
It’s worth contacting local dealerships and mechanics to see if they can complete the work for you and the price they offer. You might find that you need to travel to another town or city to have the tinting done at a lower cost. Be sure to set a clear budget beforehand and take into account any travel costs too.
How Does Car Window Tinting Work?
When you tint a window, a lightweight film is applied to the inside pane of the glass. It is not applied to the outside of the glass. This is to protect the tinting from wear and tear, flying debris, and harsh sunlight.
The first layer will be a strong polyester laminate which should improve the performance of the windows. The polyester is a transparent film.
The next film will have tinting agents like metals and dyes, which create the shading effect. This is the layer that blocks UV rays to protect your skin from overexposure to harsh sunlight.
What Is The Best DIY 35% Tinting Product?
With so many options to choose from, it can be hard to find a tint that will actually work well on your car, especially if you buy it online. We have done a lot of research to figure out the best tinting product to apply to your vehicle yourself, and we recommend using the MKBROTHER.
Why Is This The Best?
We praise MKBROTHER so highly because of their easy-to-apply directions, their 99% UV blocking, and their scratch-resistant materials.
The MKBROTHER has a strong tint which allows in visible light but rejects the heat of the sun and the UV rays up to 99% while still sticking to the 35% restriction. This blocking doesn’t create a glare which means you won’t be distracted by the moving sunlight. The lack of glare also means that your vehicle’s interior won’t be affected by the sun rays, allowing it to stay showroom-ready for longer.
As the film is not made from metal fragments, you don’t have to worry about the tinting blocking any of your technology which normally relies on signaling.
How To Apply To Your Car
The tint is made of an adhesive film, which means all you need to do is apply the tint to the car’s window, with no special equipment on hand.
First, you need to clean the glass on your car to remove any impurities. Next, you want to cut the film to match your car’s window size. We would advise that you check their sizing section before buying, as you will want more than enough to cover your window.
After that, you can pull one corner of the tint’s protective layers to expose the adhesive. You will be given a spray solution. Spray this solution onto the adhesive side of the film and onto the inside of the window you are planning on tinting. At this point, depending on your state, you would apply the legalization sticker.
Lastly, you should place the film onto the window with the adhesive sides connecting. Then flatten out any bubbles which may have occurred in the process. If you have left any film on the edge of the window, you can cut it off with an extractor knife.
Pros & Cons Of DIY vs Professional Fitting
There is an obvious reason for doing a DIY fitting instead of hiring a professional, and that’s the price. DIY tinting is so much cheaper that it is definitely worth considering. This can help you either save money or allow you to buy better quality film without the higher charge that the professional will ask for.
However, there is a reason why professionals charge these higher prices. It’s because creating a seamless installation isn’t always easy. If you put the tinting on incorrectly, it won’t last as long, nor will it protect you as much as it should.
A medical exemption is permitted in Oklahoma, meaning your tint can exceed the legal requirements if needed. The exemptions are issued by the Commissioner of Public Safety for vehicle owners or habitual passengers.
To gain a waiver and access medical exemption, you will need a written attestation from a licensed physician. They must be licensed according to Section 497 of Title 59 of the Oklahoma Statutes.
Once you have this exemption, you can reduce the VLT on rear and side windows further and alter the color of the tint if needed.