This guide has compiled the Wyoming State window tinting laws, including the tint percentage laws for the state. Basic information including how dark or how reflective a window tint can be in Wyoming are also included. Additional information includes medical exemptions, restrictions, and potential penalties. Wyoming State first issued window tint laws in 1996.
Wyoming State Automotive Window Tinting Rules
How dark can window tint be in Wyoming?
Tint VLT: Windshield: Non-reflective tint is permitted along the top 5 inches, or above the manufacturer’s AS-1 line.
Tint VLT: Front Side Windows: Must allow more than 28% of light in.
Tint VLT: Back Side Windows: Must allow more than 28% of light in.
Tint VLT: Rear Windows: Must allow more than 28% of light in.
How reflective can window tint be in Wyoming?
Tint Reflection: Front Side Windows: Must not be more than 20% reflective.
Tint Reflection: Rear Side Windows: Must not be more than 20% reflective.
Other Wyoming automotive window tinting rules & regulations:
Restricted Colors: RED, YELLOW, and AMBER colors are restricted on the windshield. No other color restrictions apply.
Side Mirrors: Dual side mirrors are required if any window is tinted.
Certificate Requirements: Manufacturers are not required to certify the film they sell in Wyoming.
Sticker Requirements: No sticker identifying legal tinting is required by Wyoming State law.
Penalties for Non-Compliance: Non-compliance will result in a ticket and fine, typically $150.
Wyoming Tint Law Reference
Exterior Window VLT Tint
How Much Does Car Window Tinting Cost in Wyoming State?
The cost of window tinting in Wyoming state is roughly $200 for a film tint. A basic film tint for a four-door sedan is likely to cost around $150-$250. This cost is likely to change depending on the size of the vehicle, and the number of windows that require tinting. For a quality film such as a ceramic tint, the cost will be around $400. Again, the price will vary in relation to vehicle size. A home DIY kit is the least expensive option, and could cost under $100.
How Does Car Window Tinting Work?
When you tint a window, a lightweight film is applied to the inside pane of the glass. It is not applied to the outside of the glass. This is to protect the tinting from wear and tear, flying debris, and harsh sunlight.
The first layer will be a strong polyester laminate which should improve the performance of the windows. The polyester is a transparent film.
The next film will have tinting agents like metals and dyes, which create the shading effect. This is the layer that blocks UV rays to protect your skin from overexposure to harsh sunlight.
What Is The Best DIY 35% Tinting Product?
With so many options to choose from, it can be hard to find a tint that will actually work well on your car, especially if you buy it online. We have done a lot of research to figure out the best tinting product to apply to your vehicle yourself, and we recommend using the MKBROTHER.
Why Is This The Best?
We praise MKBROTHER so highly because of their easy-to-apply directions, their 99% UV blocking, and their scratch-resistant materials.
The MKBROTHER has a strong tint which allows in visible light but rejects the heat of the sun and the UV rays up to 99% while still sticking to the 35% restriction. This blocking doesn’t create a glare which means you won’t be distracted by the moving sunlight. The lack of glare also means that your vehicle’s interior won’t be affected by the sun rays, allowing it to stay showroom-ready for longer.
As the film is not made from metal fragments, you don’t have to worry about the tinting blocking any of your technology which normally relies on signaling.
How To Apply To Your Car
The tint is made of an adhesive film, which means all you need to do is apply the tint to the car’s window, with no special equipment on hand.
First, you need to clean the glass on your car to remove any impurities. Next, you want to cut the film to match your car’s window size. We would advise that you check their sizing section before buying, as you will want more than enough to cover your window.
After that, you can pull one corner of the tint’s protective layers to expose the adhesive. You will be given a spray solution. Spray this solution onto the adhesive side of the film and onto the inside of the window you are planning on tinting. At this point, depending on your state, you would apply the legalization sticker.
Lastly, you should place the film onto the window with the adhesive sides connecting. Then flatten out any bubbles which may have occurred in the process. If you have left any film on the edge of the window, you can cut it off with an extractor knife.
Pros & Cons Of DIY vs Professional Fitting
There is an obvious reason for doing a DIY fitting instead of hiring a professional, and that’s the price. DIY tinting is so much cheaper that it is definitely worth considering. This can help you either save money or allow you to buy better quality film without the higher charge that the professional will ask for.
However, there is a reason why professionals charge these higher prices. It’s because creating a seamless installation isn’t always easy. If you put the tinting on incorrectly, it won’t last as long, nor will it protect you as much as it should.
Wyoming state does allow medical exemptions for a darker tint, and a certificate is issued if you qualify. To apply for a medical exemption, a person must obtain a signed statement from a physician or optometrist, declaring a darker tint medically necessary. This doctor must be licensed to practice in the state of Wyoming. A certificate will then be issued by the Wyoming Department of Transport. This must be kept in the vehicle at all times, and produced upon request.
A medical exemption is valid for as long as the symptoms persist, or until the vehicle is sold.